Mechanical keyboard with subtle green backlighting on a desk, moody gaming-room atmosphere

Hands-on looks at headsets, keyboards, mice and headphones, plus gaming and tech industry news.

Razer Basilisk V3 Pro 35K review: sensor, scroll and battery

The Razer Basilisk V3 Pro 35K lands as the flagship right-handed ergonomic mouse in Razer's Australian catalogue, aimed squarely at competitive FPS players who also stream, edit or spend long hours at their desk. It brings the new Focus Pro 35K optical sensor, Razer HyperScroll tilt and free-spin scroll wheel, eleven programmable inputs and a claimed battery life that stretches across multiple workdays. With a local RRP hovering around the AUD 240 mark at retailers such as JB Hi-Fi, PCCG and the Razer online store, it sits in the same bracket as the Logitech G Pro X Superlight 2 and a step above Razer's own DeathAdder V3 Pro.

For Australian PC builders, this mouse arrives at a time when 1440p 240 Hz monitors, low-latency NBN connections and the booming local esports scene in Sydney and Melbourne are pushing peripherals harder than ever. The Basilisk V3 Pro 35K is built to keep up with that demand, with a 1 ms wireless poll rate, on-board memory and a sensor that tracks accurately even on a glass surface. This review digs into how it performs in day-to-day Australian gaming sessions, how the optical sensor holds up across FPS and MMO titles, and whether the customised scroll wheel and long battery run-time justify the price for local buyers.

Sensor and tracking performance

The optical sensor at the heart of the Basilisk V3 Pro 35K is Razer's Focus Pro 35K, an evolution of the 30K unit found in the previous generation. It offers 35,000 DPI sensitivity, 750 IPS tracking speed and 70 G acceleration, but the raw numbers are less interesting than the tracking consistency in real gameplay. In testing across Counter-Strike 2, Valorant and Apex Legends, the cursor never spun out during flicks or wide-angle swipes, even on a worn cloth pad after several months of daily use.

What sets this sensor apart is Razer's Smart Tracking, Multi-Device and Smart Reel features, all of which automatically adjust lift-off distance and tracking behaviour based on the surface. Players who game at a desk with a glass mousepad, or who switch between a wooden tabletop and a fabric mat during LAN events, will appreciate how the mouse adapts without manual tweaking. The sensor also reads accurately at very low DPI, which matters for low-sensitivity CS2 players who run 400 or 800 DPI with in-game multipliers.

Compared with the older 26K sensor in the original Basilisk Ultimate and the 30K unit in the DeathAdder V3 Pro, the 35K sensor is a refinement rather than a revolution. Tracking jitter is slightly lower, especially at sub-800 DPI, and the lift-off calibration is more reliable. Australian competitive players who previously had to manually re-tune their sensitivity after each firmware update should find the new sensor more forgiving.

The smart reel and button layout

The standout feature of the Basilisk V3 Pro 35K is still the Razer HyperScroll tilt and free-spin scroll wheel, which Razer now calls the Smart Reel. In tactile mode it delivers the familiar notched feel for weapon switching in shooters and brush adjustments in design tools, but a single press of the button behind the wheel switches it into a smooth, free-spinning mode ideal for browsing long patch notes, jumping between tabs or flicking through a Discord channel on a quiet Brisbane evening. A third mode offers accelerated scrolling, where the wheel spins freely but decelerates gradually, mimicking inertia.

The Smart Reel can also be configured through Razer Synapse to toggle automatically based on the application in focus, which is genuinely useful. In Photoshop it spins smoothly, in Chrome it returns to tactile mode, and in Excel it accelerates when scrolling through spreadsheets. Eleven programmable inputs are spread across the shell, including the DPI clutch behind the scroll wheel, two thumb buttons, a sniper button and Razer's signature side puck on the left flank. The side puck can be swapped for alternative shapes via a small magnetic attachment, which is a nice touch for left-handed users who mirror the mouse or for those who prefer a flat profile during long MMORPG sessions.

The main left and right clicks use Razer's optical v3 switches, rated for 90 million clicks. They feel crisp and consistent, with a short pre-travel and a satisfying click tone that is a touch louder than the silent switches on the Logitech G502 X Plus. For Australian streamers recording in a shared house in Melbourne or Sydney, the slightly louder click is worth keeping in mind when capturing audio for Twitch or YouTube.

Battery, wireless and charging

Battery life is one of the biggest selling points of the Basilisk V3 Pro 35K, and Razer's claim of up to 150 hours on a single charge via the 2.4 GHz Hyperspeed dongle holds up under sustained use. In mixed testing — three hours of CS2 ranked, two hours of spreadsheet work, an evening of YouTube and a few hours of Photoshop — the mouse dropped roughly 8 percent over four days, which works out to around 22 hours per 10 percent, putting real-world stamina at roughly 200 hours at 1000 Hz polling. Heavier RGB effects and constant sensor scanning will shorten that, but most Australian players will only need to charge once every two to three weeks.

Charging is handled via the included USB-C cable or the wireless Qi-compatible Razer Mouse Dock Pro, which is sold separately in Australia for around AUD 60. The dock adds a magnetic pogo-pin charging puck and a third USB port, turning the mouse into a desktop charging station. The cable itself is a soft, braided 1.8 m length that is long enough for tower PCs under a desk without dragging on the floor.

Wireless performance is where the Basilisk V3 Pro 35K shines. Using the 2.4 GHz dongle plugged into a rear USB port on a mid-tower placed in a Sydney home office, latency felt indistinguishable from a wired mouse across CS2, Apex Legends and Diablo IV. The mouse also supports Bluetooth, which is handy for quick pairing with a Surface Pro during a trip to a café in Surry Hills or for switching between a work laptop and a gaming rig without unplugging the dongle. Razer has clearly learned from earlier Hyperspeed dongles, and the connection held steady through two plasterboard walls during testing.

Ergonomics, build and software

The shape of the Basilisk V3 Pro 35K is identical to the V3 Pro it replaces, which is a positive for fans of the line. It is a medium-to-large right-handed ergonomic mouse, weighing in at around 112 g without the cable, which is heavier than the 60 g Logitech G Pro X Superlight 2 but lighter than the original Basilisk Ultimate. The hump sits toward the rear, the thumb rest is well defined and the PTFE feet glide smoothly on both hard and cloth surfaces. For Australian users with average-to-large hands who palm-grip or use a relaxed claw, the shape is genuinely comfortable across eight-hour workdays followed by late-night ranked sessions.

Build quality is solid. The shell has minimal flex, the side buttons have a satisfying snappy action and the scroll wheel feels robust even in free-spin mode. The mouse does not rattle when shaken, which can be a tell-tale sign of loose internals on cheaper units. There is some minor creaking around the DPI button when pressed firmly, but it is not a deal-breaker.

Software support is via Razer Synapse 3, which is fully functional in Australia and supports local keyboards, headphones and mouse mats in a single profile. Synapse allows per-application DPI, button mapping, scroll wheel mode toggling, surface calibration and RGB effects. The on-board memory stores up to five profiles, so gamers who travel to LAN events at Melbourne Convention Centre or Sydney Showground can take their settings without installing Synapse on tournament PCs. Razer also supports the mouse through its standard firmware updates, which have been more reliable over the past 18 months than they were on the original Basilisk Ultimate.

Real-world gaming in Australia and how it stacks up

In practical Australian gaming conditions — humid Sydney summers, dust from a Perth construction site and the occasional coffee spill during a long night in a share house — the Basilisk V3 Pro 35K has held up well. The matte finish does not show fingerprints as badly as glossy competitors, and the PTFE feet have not worn unevenly after roughly two months of daily use. The mouse also pairs cleanly with a Razer BlackWidow V4 Pro and a Razer Barracuda Pro headset over a single Synapse profile, which simplifies setup for Aussie streamers running a multi-device battlestation.

For value-conscious local buyers, the mouse competes directly with the Logitech G Pro X Superlight 2, Glorious Model O 2 Pro and Razer's own DeathAdder V3 Pro. The comparison below summarises the key differences based on local AUD pricing at Australian retailers as of mid-2025.

Mouse Sensor Weight Battery (hrs) Wireless Scroll modes Approx AUD
Razer Basilisk V3 Pro 35K Focus Pro 35K optical 112 g ~200 2.4 GHz + BT Tactile, free-spin, smart 240
Logitech G Pro X Superlight 2 Hero 2 optical 60 g ~95 Lightspeed 2 Tactile only 220
Glorious Model O 2 Pro BAMF 2 optical 65 g ~80 2.4 GHz + BT Tactile only 180
Razer DeathAdder V3 Pro Focus Pro 30K optical 88 g ~170 Hyperspeed Tactile only 200

The Basilisk V3 Pro 35K trades weight for the most flexible scroll system on the market and class-leading battery stamina. Australian gamers who play a mix of FPS, MMO and creative software will benefit most from those features, while pure competitive players chasing every gram of weight saving will lean toward the Logitech or Glorious alternatives.

Who the Basilisk V3 Pro 35K suits best

Ready to upgrade your battlestation? Head to the Lason Arena Gaming store page for live AUD pricing, current sale alerts on Razer gear and bundled deals with local retailers. Subscribers can also pick up our free mouse-pad sizing guide and FPS sensitivity calculator to dial in the Basilisk V3 Pro 35K the moment it lands on your desk.